You are here: Home » Products » Wireless Data Transmission » Super-LoRa Series » Super-LoRa Data Radio

Super-LoRa Data Radio

Smart, secure, industry-leading speed licensed point-to-multipoint SCADA communications for industrial monitoring and control for the electricity, water, oil and gas industries.

Model:
Super-LoRa
Brand:
WDS

Quantity:
Availability:





Inquire Add to Basket

The Super-LoRa in brief

Frequency bands of 135 – 175, 215 – 240, 400 – 520, 757 – 758 and 787 – 788, 896 – 902 and 928 – 960 MHz
RS-232 and IEEE 802.3 protocols with multiple port options
Software selectable 12.5 kHz, 15 kHz, 25 kHz 30 kHz and 50 kHz channel sizes. For other channel sizes please consult WDS
Full and half duplex operation
Single or dual frequency
Gross data rates greater than 200 kbit/s
256, 192 or 128 bit AES encryption
Adaptive Coding and Modulation: QPSK to 64 QAM
Advanced forward error correction
Ethernet and IP / TCP / UDP header compression
(ROHC) and payload compression
Software selectable dual / single antenna port operation
Transparent to all common SCADA protocols
Dedicated alarm port
Protected master station and remote station options
Power optimized option
Radio GPS coordinates
–40 to +70 °C operational temperature
210 mm (W) x 130 mm (D) x 41.5 mm (H)
FCC and IC standards compliant
Seamlessly integrates with Aprisa XE point-to-point radio

Product Advantage：

High capacity: to meet the growing number of data-intensive applications in the SCADA environment, the Super-LoRa provides data rates of up to 216 kbit/s in 50 kHz licensed channels.
Secure: with its defense in depth approach, including AES encryption, authentication, address filtering and user access control including RADIUS, the Super-LoRa protects against vulnerabilities and malicious attacks.
Future-proof: the Super-LoRa supports multiple serial and Ethernet interfaces in a single, compact form factor, and is standards-based for long term incorporation into SCADA networks while protecting the legacy investment in serial devices.
Advanced L2 / L3 capabilities: selectable L2 Bridge or L3 Router modes, with VLAN, advanced QoS,filtering and IP header and payload compression attributes to support narrow bandwidth channels and mission critical traffic while meeting increasing security and IP network policy requirements. Advanced payload and Ethernet / IP / TCP / UDP header compression.
Adaptable: the Super-LoRa integrates into a range of network topologies, with each unit configurable as a master station, repeater or remote station; connect multiple RTUs / PLCs to a single radio.
Flexible interfaces: the data interfaces can be configured for serial or Ethernet operation; a range of options are supported, including two serial and two Ethernet, one serial and three Ethernet, or four Ethernet ports. Support for NMEA GPS receiver option.
Link efficiency: Adaptive Coding and Modulation (ACM) and forward error correction maintains the integrity of the wireless connection while an effective channel access scheme and IP routing ensures efficient transfer of data across the Super-LoRa network.
Reliable an robusdt: the Aprisa SR+ requires no manual component tuning and maintains its high power output and performance over a wide temperature range.
Easily managed: an easy to use GUI supports local element management via HTTPS and remote element management over the air and SNMP support allows network-wide monitoring and control via a variety ofsupported third party network management systems.

Super-LoRa applications

Electricity grid: distribution automation control and protection in MV / HV distribution / transmission
Smart grid: concentrator communications and GPRS replacement
Oil & Gas: production metering, lift pump automation
AMI / AMR: high density data concentrator backhaul
Renewables: wind farm, tidal, hydro automation
Water and wastewater: flow, level, pressure modulation automation and pump status

Technical Specifications of Super-LoRa

GENERAL
NETWORK TOPOLOGY	Point-to-multipoint(PMP), Master,Remote, Repeater
NETWORK INTEGRATION	Serial and Ethernet(router or bridge mode)
PROTOCOLS
ETHERNET	IEEE802.3, 802.1d/q/p
SERIAL	Legacy RS-232 transport
WIRELESS	Proprietary
SCADA	Transparent to all common SCADA protocols such as Modbus, IEC 60870-5-101/104, DNP3 or similar
RADIO	FREQ BAND	TUNING RANGE		TUNE STEP
FREQUENCY RANGE	150 MHz	135 – 175 MHz		0.625 kHz
	230 MHz	215 – 240 MHz		0.625 kHz
	400 MHz	400 – 470 MHz		6.25 kHz
(Note 4)	450 MHz	450 – 520 MHz		6.25 kHz
(Note 4)	700 MHz	757 – 758 & 787 – 788 MHz		6.25 kHz
(Note 5)	896 MHz	896 – 902 MHz		6.25 kHz
(Note 5)	928 MHz	928 – 960 MHz		6.25 kHz
CHANNEL SIZE	12.5 kHz, 15 kHz, 25 kHz, 30 kHz and 50 kHz software selectable
DUPLEX	Single frequency half-duplex Dual frequency half-duplex Dual frequency full-duplex
FREQUENCY STABILITY	± 0.5 ppm
FREQUENCY AGING	< 1 ppm / annum
TRANSMITTER
MAX PEAK ENVELOPE POWER (PEP)	10.0 W (+40 dBm)
AVERAGE POWER OUTPUT	64 QAM 0.01 – 2.5 W (+10 to +34 dBm, in 1 dB steps)
	16 QAM 0.01 – 3.2 W (+10 to +35 dBm, in 1 dB steps)
	QPSK 0.01 – 5.0 W (+10 to +37 dBm, in 1 dB steps)
(Note 2)	4-CPFSK 0.01 – 10.0 W (+10 to +40 dBm, in 1 dB steps)
ADJACENT CHANNEL POWER	< –60 dBc
TRANSIENT ADJACENT CHANNEL POWER	< –60 dBc
SPURIOUS EMISSIONS	< –37 dBm
ATTACK TIME	< 1.5 ms
RELEASE TIME	< 0.5 ms
DATA TURNAROUND TIME	< 2 ms
EMISSION DESIGNATOR SUFFIX	QPSK G1D, QAM D1D
RECEIVER		12.5 kHz	25 kHz	50 kHz
SENSITIVITY (BER < 10-6) max coded	64 QAM	–103 dBm	–99 dBm	–96 dBm
max coded	16 QAM	–110 dBm	–107 dBm	–104 dBm
max coded	QPSK	–115 dBm	–112 dBm	–109 dBm
max coded	4-CPFSK	–113 dBm	–110 dBm	–107 dBm
ADJACENT CHANNEL SELECTIVITY		> –47 dBm	> –37 dBm	> –37 dBm
(Note 1)		[> 48 dB]	[> 58 dB]	[> 58 dB]
CO-CHANNEL REJECTION max coded QPSK	> –10 dB
CO-CHANNEL REJECTION max coded 64 QAM	> –20 dB
INTERMODULATION RESPONSE REJECTION	> –35 dBm [> 60 dB ^{Note 1}]
BLOCKING OR DESENSITISATION	> –17 dBm [> 78 dB ^{Note 1}]
SPURIOUS RESPONSE REJECTION	> –32 dBm [> 63 dB ^{Note 1}]
FORWARD ERROR CORRECTION	Variable Reed Solomon plus convolutional code
ADAPTIVE BURST SUPPORT	Adaptive Coding and Modulation
SECURITY
DATA ENCRYPTION	256, 192 or 128 bit AES
DATA AUTHENTICATION	CCM
INTERFACES
ETHERNET	2, 3 or 4 port RJ45 10/100Base-T switch (specified at order)
SERIAL	2, 1 or 0 port RJ45 RS-232 (specified at order) Additional RS-232 / RS-485 port via USB converter (optional)
MANAGEMENT	1 x USB micro type B (device port) 1 x USB standard type A (host port) 1 x Alarm port RJ45
ANTENNA	2 x TNC 50 ohm female Software selectable single or dual port operation
LEDs	Status: OK, MODE, AUX, TX, RX Diagnostics: RSSI, traffic port status
TEST BUTTON	Toggles LEDs between diagnostics / status
PRODUCT OPTIONS
DATA PORT CONFIGURATION	2 x Ethernet ports + 2 serial ports 3 x Ethernet ports + 1 serial port 4 x Ethernet ports
POWER OPTIMIZED	Providing optimized power and sleep mode
PROTECTED STATION	Providing hot-swappable / hot-standby redundant hardware switching (13.8 VDC or 48 VDC)
GPS RECEIVER	Support for NMEA GPS receiver with radio coordinates
POWER
INPUT VOLTAGE	10 – 30 VDC (13.8 V nominal)
RECEIVE All bands	< 3 W (217 mA at 13.8 VDC) in active receive state < 2 W (145 mA at 13.8 VDC) in idle receive state < 0.5 W (36 mA at 13.8 VDC) in sleep mode
TRANSMIT 135 and 220 MHz	< 26 W (1884 mA at 13.8 VDC)
400, 450, 700, 896, 928 MHz	< 28 W (2028 mA at 13.8 VDC)
MECHANICAL
DIMENSIONS	210 mm (W) x 130 mm (D) x 41.5 mm (H) 8.27” (W) x 5.12” (D) x 1.63” (H)
WEIGHT	1.25 kg (2.81 lbs)
MOUNTING	Wall, Rack or DIN rail
ENVIRONMENTAL
OPERATING TEMPERATURE	–40 to +70 ˚C (–40 to +158 ˚F)
HUMIDITY	Maximum 95 % non-condensing
MANAGEMENT & DIAGNOSTICS
LOCAL ELEMENT	Web server with full control / diagnostics Partial diagnostics via LEDs and test button Software upgrade from PC or USB flash drive
REMOTE ELEMENT	Over-the-air remote element management with control / diagnostics Network software upgrade over-the-air
NETWORK	SNMPv2 and SNMPv3 security support for integration with external network management systems
COMPLIANCE
RF	FCC CFR47 Part 24 / 27 / 90 / 101, IC RSS 119 / RSS 134
	BAND	FCC ID:		IC:
	135	UIPSQ135M150		6772A-SQ135M150
	220	UIPSQ215M141		6772A-SQ215M141
	400	UIPSQ400M1311		6772A-SQ400M1311
	450	UIPSQ450M140		N/A
	700	UIPSQ757M160		N/A
	896	UIPSQ896M141		6772A-SQ896M141
	928	UIPSQ928M141		6772A-SQ928M141
EMC	FCC CFR47 Part 15, EN 301 489-5, ICES-003
SAFETY	EN 60950, Class 1 division 2 for hazardous locations
ENVIRONMENTAL	ETS 300 019 Class 3.4, IEEE 1613 Class 2 IEC 61850-3, Ingress Protection IP51

Notes:

1. The receiver figures are shown in typical fixed jamming dBm values and dB values [in brackets] relative to the sensitivity.Relative values are given for QPSK modulation and max coded FEC. Refer to the Aprisa SR+ User Manual for a complete list of modulation and coding levels.

2. Please consult 4RF for availability.

3. The gross data rate for the 12.5 kHz channel size varies with regulatory compliance.

4. The 450 MHz and 700 MHz bands are only available for FCC.

5. The receive tuning range is specified. The transmit tuning range is 896 - 960 MHz.

MDS SD04-MDBESNNSNN Spec Sheet-2

Super-LoRa Data Radio

Related Products

Quick Links

Product Category

Solutions